麻新電子股份有限公司MASHIN ELECTRIC CORP -- SC-1000+
正在加載......
X
 
會員帳號 :
會員密碼 :
忘記密碼  加入會員

SC-1000+   

SC-1000+ 12V Smart Battery Charger (For Lead-acid & LiFePO4 Batteries)


• SC-1000+ is an intelligent and multi-functional battery charger. It can charge for both Lead-acid and LiFePO4 Batteries.
• 8 Stage Charging Mode to maintain your battery and extend its service life.
• Battery tester function for you to check your Generator and Engine start easily whenever you want to.
• With DC Supply which you can use OBDⅡ(option)/ Cigarette Female Socket and USB Port to charge your electronic devices.

Features

◎ Easy to use
◎ 3.5" LCD Display Panel
◎ ECO Saving
◎ 8 Stage Charging Mode
◎ 3 Charging Mode Selection (Normal / Snow / Boost)
◎ Charging Current Selection:
For Lead-acid battery: 1A / 3A / 7A / 10A.
For LiFePO4 battery: Maximum current is 10A.
◎ Testing Program
>Battery
>Alternator
>Engine Start
◎ Complete Safety Protection
◎ DC Supply function: OBDⅡ / Cigarette Connector / Cigarette Female Socket
◎ USB Port
◎ User-Friendly Interface
◎ Portable Hanging Hook
◎ Adopt a pulse charging scheme
◎ Saving your last charging process automatically
◎ Battery type selection: WET / MF / AGM / GEL / LiFePO4
◎ Modern & Simple design


8 Stage Charging Mode


① Soft start: Tests if the battery can accept charge, charging will commence if battery is okay.
② Pulse: Pulsing current removes sulphates from the battery plates and restores battery efficiency and capacity.
③ Bulk Charge: Charges with maximum set current until approximately 80% of capacity.
④ Absorption: Charging with constant voltage and declining current to equalizing and maximize up the battery capacity.
⑤ Test: Tests if the battery can hold charge. If the batteries voltage drops below 11.6V within 10 minutes, battery is faulty.
⑥ Float: Keep the battery voltage at maximum level by providing a constant voltage charge.
⑦ Maintenance: Battery maintenance mode active when the battery voltage is lower than 12.6V the charger will automatically start maintenance charging.
⑧ Cycle Recharge: A continuation of the maintenance mode which monitors battery voltage and do cycle charging automatically for every 15 days.

LCD Display Panel and Function



SC-1000+
Input Power AC100V~AC240V 50/60HZ
Normal Voltage DC 12V
Charging Voltage Normal Mode = max.DC14V~15V
Snow Mode = max.DC14.6V~15.5V
Boost Mode = max.DC16.5V
LiFePO4 Mode = max. DC14.6V
USB Charging Current DC 5V 2.1A
DC Supply DC 13.5V 5A
Charging Current 1A / 3A / 7A / 10A (Current Selection)
5A / 10A (LiFePO4 Current Selection)
Protection

1. Short Circuit Protection
2. Over-temperature Protection
3. Spark Protection
4. Abnormal Battery Voltage Protection
5. Abnormal Battery Protection
6. Reverse Polarity Protection
7. Disconnection Protection
8. Anti-arc Protection

Type of Batteries WET / MF / AGM / GEL / LiFePO4
Operating Temperature -20~40℃ , Humidity 90%
Dimensions ( L* W * H ) 197 x 113 x 61 mm ±2mm。
Weight 0.95 kgs

Ideal Uses


CHARGING CURVE


DIMENSIONS