麻新電子股份有限公司MASHIN ELECTRIC CORP -- SC-1000S
正在加載......
X
 
會員帳號 :
會員密碼 :
忘記密碼  加入會員

SC-1000S   

SC-1000S 12V/24V Smart Battery Charger (For Lead-acid & LiFePO4 Batteries)


• SC-1000S is an intelligent and multi-functional battery charger. It can charge for both Lead-acid and LiFePO4 Batteries.
• 8 Stage Charging Mode to maintain your battery and extend its service life.
• Battery tester function for you to check your Generator and Engine start easily whenever you want to.
• With DC Supply which you can use OBDⅡ(option)/ Cigarette Female Socket / Cigarette Connector .

Features

◎ Easy to Use
◎ 3.5" LCD Display Panel
◎ Eco Saving
◎ 8 Stage Charging Mode
◎ Charging Mode Selection
> 12V: Normal / Snow / Boost                    
> 24V: Normal / Snow
◎ Charging Current Selection:

  > 12V: For Lead-acid battery: 1A / 3A / 7A / 10A.
> For LiFePO4 battery: Maximum current is 10A.
> 24V: For Lead-acid battery: 1A / 2A / 4A / 6A.
◎ Testing Program
>Battery

  > Alternator (Only for 12V)
> Engine Start (Only for 12V)

◎ Complete Safety Protection
◎ Low Voltage Solutions
◎ DC Supply Function Supply Power For Your Car Electronic Devices. Accessories :

  > OBDⅡ/ Cigarette Connector / Cigarette Female Socket
◎ User-Friendly Interface
◎ Portable Hanging Hook
◎ Adopt a Pulse Charging Scheme
◎ Saving Your Last Charging Process Automatically
◎ Battery Type Selection: WET / MF / AGM / GEL / LiFePO4
◎ Modern & Simple Design


8 Stage Charging Mode


① Soft start: Tests if the battery can accept charge, charging will commence if battery is okay.
② Pulse: Pulsing current removes sulphates from the battery plates and restores battery efficiency and capacity.
③ Bulk Charge: Charges with maximum set current until approximately 80% of capacity.
④ Absorption: Charging with constant voltage and declining current to equalizing and maximize up the battery capacity.
⑤ Test: Tests if the battery can hold charge. If the batteries voltage drops below 11.6V within 10 minutes, battery is faulty.
⑥ Float: Keep the battery voltage at maximum level by providing a constant voltage charge.
⑦ Maintenance: Battery maintenance mode active when the battery voltage is lower than 12.6V the charger will automatically start maintenance charging.
⑧ Cycle Recharge: A continuation of the maintenance mode which monitors battery voltage and do cycle charging automatically for every 15 days.


LCD Display Panel and Function



SC-1000S
Input Power AC100V~AC240V 50/60HZ
Normal Voltage DC 12V DC 24V
Charging Voltage Normal Mode = max.DC14V~15V
Snow Mode = max.DC14.6V~15.5V
Boost Mode = max.DC16.5V
LiFePO4 Mode = max. DC14.6V
Normal Mode = max.DC28.8V~30V
Snow Mode = max.DC29.2~30V
Charging Current 1A / 3A / 7A / 10A (Current Selection) 1A / 2A / 4A / 6A (Current Selection)
5A / 10A (LiFePO4 Current Selection)
DC Supply DC 13.5V 5A DC 27V 5A
Protection

1. Short Circuit Protection
2. Over-temperature Protection
3. Spark Protection
4. Abnormal Battery Voltage Protection
5. Abnormal Battery Protection
6. Reverse Polarity Protection
7. Disconnection Protection
8. Anti-arc Protection

Type of Batteries WET / MF / AGM / GEL / LiFePO4
Operating Temperature -20~40℃ , Humidity 90%
Dimensions ( L* W * H ) 197 x 113 x 61 mm ±2mm。
Weight 0.95 kgs

Ideal Uses


CHARGING CURVE


DIMENSIONS