SC-1000 12V Smart Battery Charger (For Lead-acid Battery)
◎ Easy to use
◎ 3.5" LCD Display Panel
◎ ECO Saving
◎ 8 Stage Charging Mode
◎ 3 Charging Mode Selection (Normal / Snow / Boost)
◎ 4 Charging Current Selection (1A / 3A / 7A / 10A)
◎ Testing Program
◎ Complete Safety Protection
◎ User-Friendly Interface
◎ Portable Hanging Hook
◎ Adopt a pulse charging scheme
◎ Saving your last charging process automatically
◎ Battery type selection: WET / MF / AGM / GEL
◎ Modern & Simple design
8 Stage Charging Mode
① Soft start: Tests if the battery can accept charge, charging will commence if battery is okay.
② Pulse: Pulsing current removes sulphates from the battery plates and restores battery efficiency and capacity.
③ Bulk Charge: Charges with maximum set current until approximately 80％ of capacity.
④ Absorption: Charging with constant voltage and declining current to equalizing and maximize up the battery capacity.
⑤ Test: Tests if the battery can hold charge. If the batteries voltage drops below 11.6V within 10 minutes, battery is faulty.
⑥ Float: Keep the battery voltage at maximum level by providing a constant voltage charge.
⑦ Maintenance: Battery maintenance mode active when the battery voltage is lower than 12.6V the charger will automatically start maintenance charging.
⑧ Cycle Recharge: A continuation of the maintenance mode which monitors battery voltage and do cycle charging automatically for every 15 days.
LCD Display Panel and Function
1. Short Circuit Protection
2. Over-temperature Protection
3. Spark Protection
4. Abnormal Battery Voltage Protection
5. Abnormal Battery Protection
6. Reverse Polarity Protection
7. Disconnection Protection
8. Anti-arc Protection