麻新電子股份有限公司MASHIN ELECTRIC CORP -- SC-600
正在加載......
X
 
會員帳號 :
會員密碼 :
忘記密碼  加入會員

SC-600   

SC Series Hybrid Dual Output Intelligent Battery Charger 12V 6Amp / 5V 1Amp


SC-600 are fully automatic, spark proof and reverse polarity protected and easy to use. SC-600 smart battery charger will undergo a multi stages during the charging process to revive, charge, recondition and maintain all types of lead-acid batteries, prolong their life.
Furthermore, charging only to meet the needs of the battery and therefore eradicating the possibility of over-charging or under-charging the battery and reducing its lifespan as a result.
SC-600 meet the certified of CE, FCC, IV the Certified by the California Energy Commission (CEC) , RoHS.

Ease of use and safety functions :

◎ Pulse charged:

Pulse mode can remove the lead sulfate crystallization which was adhered to the electrode plate and recover the electrode plate's proper power storage area.

◎ Cycle Charged function:

When the battery voltage drops, automatically performs a floating charge and periodically cycle charging, in the long term to ensure that the battery is fully charged the normal state.

◎ Boost Charging mode(Battery Rescue Mode):

When over discharge batteries unable to perform normal mode or unable be charged, the AI Boost charging mode are able be rescue.

◎ 1A / 4A / 6A charging current selectable.

◎ Handheld device charging function:

Standard 5V USB charging port support Maximum 1.5A。

◎ Complete safety protection :

Prevent the battery from reverse polarity, short circuit, Anti-Are. the battery is automatically shut off the DC output when disconnect to prevent spark and short.


8-Stage Charging Mode


1. Soft start
Tests if the battery can accept charge. Charging begins if the battery is ok.

2. Pulse
Pulsing voltage removes sulphates from the lead plates of the battery restoring the battery capacity.

3. Bulk
Charging with maximum current until approximately 80% battery capacity.

4. Absorption
Charging with constant voltage and declining current to equalizing and maximize up the battery
capacity.

5. Test
Tests if the battery can hold charge.If the batteries voltage drops below 11.6V within 10
minutes,battery is faulty.

6. Float
Keep the battery voltage at maximum level by providing a constant voltage charge.

7. Maintenance
Battery maintenance mode active when the battery voltage is lower than 12.6V the charger
automatically start maintenance charging.

8. Top-up
Auto recharge your battery every 15 days once again after complete charged.


SC-600
Input Power AC100V ~ AC 240V 50/60HZ
Normal Voltage DC 12V
Charging Voltage NORMAL MODE = max.DC14.4V
SNOW MODE = max.DC14.7V
BOST CHARGING MODE = max.DC16.5V
USB CHARGING VOLTAGE
(Handheld device charged)
DC 5V 1A (max1.5A)
Standard USB interface
Charging Current 1A /4A / 6A (CURRENT SELECTION)
Protection 1. Short Circuit Protection
2. Over-temperature Protection
3. Spark Protection
4. Abnormal Battery Voltage Protection
5. Abnormal Battery Protection
6. Reverse Polarity Protection
7. Disconnection Protection
8. Anti-arc Protection
Operating Temperature Ambient temperature 0~40℃ , Humidity 90%
Dimensions ( L* W * H ) 176 x 77 x 46 mm ±2mm。
Weight 0.68 kgs

Ideal Uses


CHARGING MODE CURVE & BOOST CHARGING MODE CURVE


DIMENSIONS