Automotive
TC Series 12V 4A Automatic Battery Charger
- Vehicle
- BatteryWET Battery MF Battery AGM Battery Deep Cycle Battery
- Voltage12V
Description
Product
FEATURE
◎ TC Series has multiple charging stages by microcoputer controlled, with 3 charging current for motorycycle and car use.
◎ Constant Voltage Charging Mode:Effectively control the charging voltage to prevent the damage of battery cell plate when over-charging.
◎ Constant Current Charging Mode:Control the charging current at certain steady point to prevent the battery absorbs too much current and cause the temperature increase rapidly to affect the battery service life and effiency.
◎ Equalizing Charging Mode:Charge each battery cell by 2.45V~2.60V to make sure both old and new battery can achieve saturated and not over and keeps saturation in 100%.
◎ Floating Charging Mode:Charge each battery cell in 2.25V to make sure battery stays inthe best saturation condition and last longer.
◎ Low Voltage Charging : When battery is over-discharged or low power for only 6V, it can still begin charge automatically.
◎ Microcomputer Detection:Check if the battery and charger are well-connected, once it connects correctly, it will charge automatically.
◎ Reverse Polarity:When the battery terminal is wrongly connected, the charger will not start charging.
◎ Abnormal Battery:When the charger cannot effectively charge the battery up to 80% within 12 hours, then the charger will stop charging and the Error Indicator will light on.
Specification
TC-1206 | |
---|---|
Charging Current | 1A / 2A / 4A |
Output Voltage | 12V DC (max.15V) |
Input Power | AC 110V 50 / 60HZ |
AC 220V 50 / 60HZ | |
Charging Mode | Constant Voltage / Constant Current / Equalizing / Floating |
Efficiency (Nominal) | <82% |
Compatible Battery | WET / MF / SLA / AGM / Deep-Cycle |
Battery Capacity (20HR) | 1A:3Ah~14Ah |
Operating Temperature | -20ºC~40ºC |
Storage | -30ºC~70ºC |
Dimension | 151 x 132 x 105 mm |
Weight | 2.6 kgs |