FC Series 36V 20A Automatic Battery Charger

FEATURE
◎ FC Series adopt MCU to determine battery voltage and automatically adjust the output voltage in order to prevent human error causing the battery damage.
◎ Constant Voltage Charging Mode：Effectively control the charging voltage to prevent the damage of battery cell plate when over-charging.
◎ Constant Current Charging Mode：Control the charging current at certain steady point to prevent the battery absorbs too much current and cause the temperature increase rapidly to affect the battery service life and effiency.
◎ Equalizing Charging Mode：Charge each battery cell by 2.45V~2.60V to make sure both old and new battery can achieve saturated and not over and keeps saturation in 100%.
◎ Floating Charging Mode：Charge each battery cell in 2.25V to make sure battery stays inthe best saturation condition and last longer.
◎ Low Voltage Charging : When battery is over-discharged or low power for only 6V, it can still begin charge automatically.
◎ Microcomputer Detection：Check if the battery and charger are well-connected, once it connects correctly, it will charge automatically. It would also detect the charging voltage and current during charging process to prevent over-temperature and over-charging.
◎ Reverse Polarity：When the battery terminal is wrongly connected, the charger will not start charging.
◎ Abnormal Battery：When the charger cannot effectively charge the battery up to 80% within 12 hours, then the charger will stop charging and the Error Indicator will light on.